Avid Technology HDX Card Installationsanleitung PDF herunterladen (Seite 16)

HDX Card Installation Guide12

To install Pro Tools cards in a Mac Pro:

1 Turn off your computer and any peripherals.

Leave your computer’s power cable plugged in so

the computer is grounded.

2 Disconnect all cables attached to the computer

(such as hard drives, displays, USB and FireWire

devices) except for the power cable.

3 Lay the computer on its side so the access

panel is facing up.

4 Open the computer case using the latch

located on the back of the computer.

5 Remove the clamp that secures the metal

access port covers to the chassis.

6 Remove the metal access port covers for the

slots you want to use.

7 Remove your computer’s SATA drive trays. If

any extra SATA drives are installed, remove

them also. Refer to your computer’s documenta-

tion for information on removing SATA drives

and SATA drive trays.

8 Connect the included custom power cable to

the motherboard and move the cable away from

the PCIe card slots. (See Figure 3 on page 12).

Before handling any card, discharge static

electricity from your clothes or body by

touching a grounded metal surface, such as

the power supply case inside your computer

with the power cable connected.

Figure 3. HDX card power cable connected to the motherboard

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 83 84

Keine Kommentare

Avid Technology HDX Card Installationsanleitung Seite 16